Quantum Data 881 - Manual (Page 470)

452 Chapter 14 DisplayPort Link Layer Testing
Overview
You can use the 882E to test DisplaPort sink and source devices. The procedures in this
chapter instruct you on how to complete the Link Layer compliance tests for DisplayPort
sink and source devices. You can initiate these tests through the 882 front panel, the
command line or through the Link Layer graphical interface available through the 882’s
home web page. This chapter provides procedures for initiating the tests through either of
these interfaces.
If you have the optional DisplayPort Auxiliary Channel Analyzer you can monitor the link
layer transactions during the link layer compliance tests or at any time during normal
operation.
Note: The DisplayPort Link Layer compliance tests are optional features. You must
purchase the optional license for these features.