Quantum Data 881 - Manual (Page 283)

881/882 Video Test Generator User Guide (Rev A.22) 265
3. Navigate to your PC and double click on the report. A sample is shown below.
Running the ViewPix test
During the ViewPix test (previously called the ReadRGB test), the Analyzer captures one
complete frame of pixel data. You can then view the RGB data from any pixel in the frame
by specifying the coordinates. This way if you know what the source is transferring or
sending for a pixel(s) you can compare it with what the analyzer detects.
You can view the captured image out the HDMI transmit port with the View Data function.
Procedures are provided below for the ViewPix test both through the front panel and the
command line.
To capture and read pixel data from the front panel:
1. Connect the HDMI/DVI transmit device to an HDMI IN connector on the generator.
2. (Optional) Connect an HDMI/DVI display to an HDMI OUT connector on the generator.