Quantum Data 881 - Manual (Page 316)

298 Chapter 10 Testing HDMI Sink Devices
This section describes the generator’s video interfaces. The video interfaces on the 882D
are shown below.
Format selection
To support HDMI, the generator provides pre-defined formats for every video format
specified in the EIA/CEA-861-C standard. These pre-defined formats support all aspects
of the HDMI signal (video, audio, and auxiliary data).
Interface Description
1 SDI/HD-SDI connector outputs a serial digital signal per SMPTE 259M and SMPTE
292M standards.
2 CVBS connector outputs an analog composite video baseband signal in accordance
with SMPTE 170M standard.
3 S-VIDEO connector outputs an S-Video split luminance (Y) and chrominance (C)
analog video signal.
4 SPECIAL connector provides multiple outputs, including:
• digital composite sync
• line sync
• frame sync
• movable scope trigger (probe) pulse
• pixel clock signal
5 HDMI OUT connector outputs full single link HDMI video, as well as DVI and modern
HDMI-compatible digital video signals.
6 DVI connector outputs full dual link HDMI video.
7 SPDIF connector inputs audio from an external source.
HDMI DVI
SPDIF
1 2 3 4 5 6 7