Quantum Data 881 - Manual (Page 208)

190 Chapter 6 Working with Formats
2. Click Format Editor. The Format Editor appears as shown below.
3. Set the format path as follows:
a. Click Get to load the format path currently set in the generator. The path is
displayed in the Path Name field.
b. To change the format path, enter new path in Path Name field and click Set.
Note: If the format path displayed is in the generator’s cache memory, you will need to
change the format path to one in flash memory or PC card.
4. Load format that most closely resembles the new format you are creating. To do this,
enter the format name in the Format Name field and click Load.
The format’s parameters appear in the Format Editor window.
5. Modify the parameters as required for the new format. Use these tips when setting new
format values: