Quantum Data 881 - Manual (Page 322)

304 Chapter 10 Testing HDMI Sink Devices
Setting Source list of formats
The generator provides a Source list of standard (pre-defined) formats. The Source list
can be set automatically when connecting to a EDID-compatible display. Otherwise, you
can manually set which formats are listed.
To automatically set Source list of formats for EDID-compatible display:
When testing EDID-compatible displays, the generator can automatically update the
Source list to include only formats supported by the display under test. To do this:
1. Connect the generator to the display you want to test.
2. Press the Sink key. The following information appears on the generator’s display.
3. Press the Options key. The following information appears on the generator’s display.
4. Choose the EDID Formats item by pressing the adjacent soft key. A + appears next to
EDID Formats indicating enabled.
The generator loads the Source list with formats supported by the connected display
(hot-plug formats read via EDID structure of attached display).
5. To redisplay all formats, press the soft key adjacent to EDID Formats. A ‘-’ (minus sign)
next to EDID Formats indicates it is disabled.
To bypass hot plug detection:
If the display under test has not implemented hot plug correctly, you will have to bypass
hot plug detection in the generator to enable video output.
1. Connect the generator to the display you want to test.
2. Press the Sink key. The following information appears on the generator’s display.
Manufacturer:SNY
Product Code:144
Serial#:7011007
Week:20 Year:1998
-EDID Formats CDF
+HP Bypass
-Emulate
Manufacturer:SNY
Product Code:144
Serial#:7011007
Week:20 Year:1998