Quantum Data 881 User Manual
Page 559
881/882 Video Test Generator User Guide
(Rev A.22)
541
3. Press the
Options key. The following information appears on the generator’s display.
4. Choose the
EDID Formats item by pressing the adjacent soft key. A + appears next to
EDID Formats, indicating it is enabled.
The generator loads the Source list with formats supported by the connected display
(hot-plug formats read via EDID structure of attached display).
5. Press the
Content key. The following information appears on the generator’s display.
6. Select an image suitable for testing the display type (such as
Master) by pressing the
soft key adjacent to the image.
Alternatively, to select the image using the command line interface, enter the following
command:
Master
7. Press the
Source key and select a format beginning with SVD by pressing the adjacent
soft key.
8. On display under test, verify format displays image properly.
9. Repeat steps 7 and 8 to test each SVD format.
-EDID Formats
CDF
+HP Bypass
-Emulate
Acer1
Acer2
Acer3
Acer4
Acer5
Acer6
Acer7
Acer8