Teledyne 300M - Manual (Page 112)

Teledyne API Model 300M CO Analyzer Instruction Manual, 04033, Rev. A
10.7 Warranty/Repair Questionnaire
Organization:_________________________________________________________________
Contact:____________________________________________ Phone:___________________
Address _____________________________________________________________________
____________________________________________________________________________
Model 300M Serial Number:_____________________________________________________
Are there any warning messages? YES NO
If YES, please list:_____________________________________________________________
____________________________________________________________________________
Please record the following values:
TEST VALUES CALIBRATION VALUES
RANGE _______PPM/PPB
CO MEAS @ ZERO _______mV
CO REF @ ZERO _______ mV CO SPAN SETTING _______PPM/PPB
MR RATIO @ ZERO _______ CO SLOPE _______
CO MEAS @ SPAN _______ mV CO OFFSET _______
CO REF @ SPAN _______ mV
MR RATIO @ SPAN _______
SAMPLE PRESS _______IN HG-A
VAC PRESS ________IN HG-A
SAMPLE FLOW _______SCC/MIN SETUP VALUES
SAMPLE TEMP _______ °C
BENCH TEMP _______ °C ELECTRIC TEST _______PPM
WHEEL TEMP _______ °C
BOX TEMP _______ °C DARK MEAS _______mV
DC POWER SUPPLY _______mV DARK REF _______mV
TIME _______HH:MM:SS
Has the unit been leak checked? YES NO
What are failure symptoms? ____________________________________________________
____________________________________________________________________________
____________________________________________________________________________
If possible, please include a portion of a strip chart pertaining to the problem. Circle pertinent
data.
Do opto-interrupter and detector waveforms match those shown in Figure 10-1 and Figure 10-2?
YES NO
Thank you for providing this information. Your assistance enables Teledyne API to respond faster
to the problem that you are encountering.
Teledyne API Customer Service
Phone: (858) 657-9800 Toll Free:(800) 324-5190 FAX: (858) 657-9816 E-MAIL: [email protected]
10-18