Teledyne 300M - Manual (Page 55)

Teledyne API Model 300M CO Analyzer Instruction Manual, 04033, Rev. A
Table 4-1: Setup Functions (Continued)
Button Sequence Function Default Limits
SETUP-MORE-DIAG-
SIGNAL I/O View the state of
internal signals N/A N/A
SETUP-MORE-DIAG-
ANALOG OUTPUT Generate Analog
Output Test Pattern N/A N/A
SETUP-MORE-DIAG-
D/A CALIBRATION Calibrate D/A and A/D
Converters N/A N/A
SETUP-MORE-DIAG-
ELECTRICAL TEST Generate Electrical
Test Output N/A N/A
SETUP-MORE-DIAG-
DARK
CALIBRATION Adjust Dark Offset 125mV 75 - 175 mV
SETUP-MORE-DIAG-
FLOW
CALIBRATION Calibrate sample
flowrate 800 cc/m 800 cc/m
SETUP-MORE-
DIAG- TEST CHAN
OUTPUT Select TEST to Analog
Output None
SETUP-MORE-DIAG-
RS-232 OUTPUT Generate RS-232
Output Test Pattern N/A N/A
SETUP-MORE-
ALRM-ALM1 Enable alarm 1 and set
limit ON 100 PPM
SETUP-MORE-
ALRM-ALM2 Enable alarm 2 and set
limit ON 300 PPM
4-9