Teledyne 300M - Manual (Page 13)

Teledyne API Model 300M CO Analyzer Instruction Manual, 04033, Rev. A
1.4 Specifications
Ranges User selectable to any full-scale range from 0 - 30 PPM up to 0 - 3,000 PPM
Zero Noise < 0.1 PPM (rms)
Span Noise < 0.5% of reading (rms) or 0.1 PPM (rms)
Lower Detectable Limit 0.2 PPM
Zero Drift (24 hours) * <0.5 PPM
Zero Drift (7 days) * <1.0 PPM
Span Drift (7 days) * 1% of reading
Linearity 1% of Full Scale
Rise/Fall Time (95%) <60 sec to 95%
Sample Flow Rate 800cc/min. ± 10%
Temperature Range 5-40 °C
Humidity Range 0-95%RH, non-condensing
Dust Sample must be dust free
Temp Coefficient < 0.5 PPM per °C
Voltage Coefficient < 0.5 PPM per Volt
Dimensions HxWxD 7" x 17" x 25" (178 mm x 432 mm x 635 mm)
Weight 50 lbs (22.7 kg)
Power 100 50/60 Hz, 115 60 Hz, 220V 50/60 Hz., 240 V 50 Hz. 250 Watts
Power, CE 230 V/50 Hz, 250 Watts
Recorder Outputs ± 100 mV, ± 1 V, ±5 V, ±10 V (Bi-Polar)
Status Output 9 status outputs from opt-isolators
Alarm output 3 opto-isolators to drive TTL relays
* at constant temperature and voltage
1-5