Teledyne 300M - Manual (Page 29)

Teledyne API Model 300M CO Analyzer Instruction Manual, 04033, Rev. A
NOTE
The operator and setup passwords can be disabled. To do this, enter
setup-password and toggle “ON” to “OFF”. Push “ENTR” and the
passwords will be displayed.
2.2 Front Panel
This section describes the operator interface from the point of view of the front panel. The front
panel consists of a 2-line by 40-character alphanumeric display, 8 push buttons, and 3 status
LED’s. Each of these features is described below.
2.2.1 Front Panel Display
The display is divided into 4 main "fields": the mode field in the upper left, the message field in
the top center, the sample concentration field consisting of the most recent instantaneous Carbon
Monoxide value field in the upper right, and the MENU field which occupies the entire bottom
line of the display. A typical display is shown in Figure 2-1.
2-3