Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 101)

9901-UDX-OM (V1.15) 9901-UDX PRODUCT MANUAL 3-47
Operating Instructions
9901-UDX Function Submenu List and Descriptions
(continued)
• Loudness-Processed Channels as
Source for AES Channel Output
LP51 L thru LP51 Rs (5.1-channel loudness processor processed
channels L thru Rs) range in Source drop-down list routes a
loudness-processed channel to be the source for the selected AES output
channel.
(In this example, loudness-processed channel LP51 L is the source for
destination AES output Ch 1)
Note: Where stereo loudness processor is available, drop-down
selections for these channels are LP2 L and LP2 R.
• Tone as Source for AES Channel
Output
Tone 50 Hz thru Tone 16 kHz range in Source drop-down list routes one
of eight tone frequencies to be the source for the selected embedded
output channel.
(In this example, 50 Hz tone is the source for destination AES output
Ch 1)
• Dolby ® Encoder Output as Source for
AES Channel Output
Encoded Dolby (L) and Encoded Dolby (R) selection in Source
drop-down list routes a Dolby encoded pair from any of the card’s Dolby
encoders (A up to D) to be the source for the selected AES output
channel.
(In this example, Dolby Digital Encoder B (L) is the source for destination
AES output Ch 1)
Note: Encoded channel pairs selected should only be applied to
companion intact pairs (e.g., signals can be applied to AES pair
1/2, or AES pair 3/4 and so on, but not split to route through
fabricated unrelated pairs such as AES ch 2/ch 3).
• Silence as Source for AES Channel
Output
Silence selection in Source drop-down list mutes the selected AES output
channel. Use this setting for any unused AES output channels.
(In this example, Silence is the source for destination Embedded output
Ch 1)
Note: If an AES pair is being used as an input, the channels do not have
be muted here.
• Gain / Mute Control Provides relative gain (in dB) control and peak level display for
corresponding AES output channel.
Also provides a channel Mute checkbox.
(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)
Table 3-2 9901-UDX Function Submenu List — continued
•
•
•
•
•
•