Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 48)

2
Installing a Rear Module
2-10 9901-UDX PRODUCT MANUAL 9901-UDX-OM (V1.15)
RM20-9901-G Base Rear Module Provides the following connections:
• Two 3G/HD/SD-SDI video input BNC ( SDI IN A and
SDI IN B )
• Eight AES I/O BNC (AES-3id) input/outputs
( AES I/O 1 thru AES I/O 8 ; I/O function of each
connection is software-configurable)
• Eight additional AES BNC (AES-3id) outputs
( AES OUT 1 thru AES OUT 8)
• Two 3G/HD/SD-SDI video output BNCs
( SDI OUT A and SDI OUT B )
Note: Operational only in conjunction with card option
+AESOUT16. Rear module mates with base
Fusion3G
®
card and option expansion card.
RM20-9901-H Base Rear Module Provides the following connections:
• Two 3G/HD/SD-SDI video input BNCs ( SDI IN A
and SDI IN B )
• Two opto-isolated GPI inputs (terminals GPI 1-G
and GPI 2-G)
• Two SPST NO GPO relay closure contacts
(floating) (terminals 1/1 and 2/2)
• Two RS485 serial ports; GUI configurable for
function (COMM1 and COMM2)
• Four 3G/HD/SD-SDI video output BNCs
( SDI OUT A thru SDI OUT D )
Note: When using Y/C (“S-video”) analog input or output, connections are as shown below and not as shown on label
(which correspond to YPbPr and composite mode connections).
Table 2-1 9901-UDX Rear Modules — continued
9901-UDX Rear Module Description
Label Y/C Input Mode Y/C Output Mode
Pr C C
Pb/C Y Y
Y/Cmpst NC Composite
C
Y
See table