Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 29)

9901-UDX-OM (V1.15) 9901-UDX PRODUCT MANUAL 1-25
Introduction
9901-UDX Functional Description
• DashBoard™ User Interface – Using DashBoard™, the 9901-UDX
and other cards installed in openGear®
1
frames such as the Cobalt ®
HPF-9000 or 8321 Frame can be controlled from a computer and
monitor.
DashBoard™ allows users to view all frames on a network with
control and monitoring for all populated slots inside a frame. This
simplifies the setup and use of numerous modules in a large
installation and offers the ability to centralize monitoring. Cards
define their controllable parameters to DashBoard™, so the control
interface is always up to date.
The DashBoard™ software can be downloaded from the Cobalt
Digital Inc. website: www.cobaltdigital.com (enter “DashBoard” in
the search window). The DashBoard™ user interface is described in
Chapter 3,“Operating Instructions”.
Note: If network remote control is to be used for the frame and the frame has not yet
been set up for remote control, Cobalt ® reference guide Remote Control
User Guide (PN 9000RCS-RM) provides thorough information and
step-by-step instructions for setting up network remote control of COMPASS
®
and FUSION3G
®
cards using DashBoard™. (Cobalt ® OGCP-9000 and
OGCP-9000/CC Remote Control Panel product manuals have complete
instructions for setting up remote control using a Remote Control Panel.)
Download a copy of this guide by clicking on the Support>Documents>
Reference Guides link at www.cobaltdigital.com and then select DashBoard
Remote Control Setup Guide as a download, or contact Cobalt
® as listed in
Contact Cobalt Digital Inc. (p. 1-34).
• Cobalt ® OGCP-9000 and OGCP-9000/CC Remote Control
Panels – The OGCP-9000, OGCP-9000/CC, and WinOGCP Remote
Control Panels conveniently and intuitively provide parameter
monitor and control of the cards within the HPF-9000 Frame.
The remote control panels allow quick and intuitive access to
hundreds of cards in a facility, and can monitor and allow adjustment
of multiple parameters at one time.
The remote control panels are totally compatible with the openGear
®
control software DashBoard™; any changes made with either system
are reflected on the other.
1. openGear® is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross
Video Limited.