Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 80)

3
9901-UDX Function Submenu List and Descriptions
3-26 9901-UDX PRODUCT MANUAL 9901-UDX-OM (V1.15)
(continued)
Table 3-2 9901-UDX Function Submenu List — continued
Noting that the incoming video contains WSS coding, Trigger on
WSS is set to ETSI, with other choices set to Off. The settings
here allow ARC to trigger only on an ETSI-coded WSS received
code.
In this example, it is desired to use the H/V re-aspecting inherent in the received
video ARC, perform the re-aspecting with no modification, and output an AFD code
representing the re-aspecting performed.
As such, Force Input Mapping is set to Follow Trigger, thereby bypassing the
Output ARC Cross-Matrix Map table and directly perform the re-aspecting defined by the
received code (in this example, Letterbox 16x9). Also in this example, the scaler is directed
to apply the output AFD re-aspecting by setting Scaler Follow AFD to Enabled.
A
B
Shown below is an example in which received 625i50 SDI video is being up-converted to 720p50. The settings shown in the
example below provide for directing the scaler to re-aspect the 4:3 input video to full, centered 16:9 re-aspecting, and mark the
output video with the AFD code representing the new re-aspected H/V format.
Note: Active ARC control available only with card equipped with
scaler. On non-scaler card, ARC control/convert function
only manipulates output SDI ARC codes and has no local
effect on card output aspect ratio.
C
In this example, since only AFD is to be outputted, AFD Output
is set to Enabled, with WSS and VI choices set to Disabled.
AFD Status shows AFD code now being outputted.
The insertion line number (using its default value here), can be
set using the AFD Output Line controls (for the progressive
format in this example, the Field 1 control serves as the line
number control).
Format
Detect/
Select
Output ARC
Cross-
Matrix
Mapping
625i50 Video Input
w/ WSS ETSI = 5
(4:3 -> 16:9)
AFD Generate/
Insert Control
WSS Generate/
Insert Control
VI Generate/
Insert Control
AFD
WSS
VI
720p50 Video
Output w/
AFD = 0100
(16:9 center)
Scaler
Scaler ARC
Command
A B C