Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 46)

2
Installing a Rear Module
2-8 9901-UDX PRODUCT MANUAL 9901-UDX-OM (V1.15)
RM20-9901-C Base Rear Module Provides the following connections:
• Four 3G/HD/SD-SDI video input BNCs ( SDI IN A
thru SDI IN D )
• Two AES I/O BNC (AES-3id) input/outputs
( AES I/O 1 and AES I/O 2 ; I/O function of each
connection is software-configurable)
• Four 3G/HD/SD-SDI video output BNCs
(SDI OUT A thru SDI OUT D )
Note: AES inputs and outputs operational only with card
option +AES installed.
RM20-9901-D Base Rear Module Provides the following connections:
• Two 3G/HD/SD-SDI video input BNCs ( SDI IN A
and SDI IN B )
• Four AES I/O BNC (AES-3id) input/outputs
( AES I/O 1 thru AES I/O 4 ; I/O function of each
connection is software-configurable)
• Two opto-isolated GPI inputs (terminals GPI 1-G
and GPI 2-G)
• Two SPST NO GPO relay closure contacts
(floating) (terminals 1/1 and 2/2)
• Two 3G/HD/SD-SDI video output BNCs
( SDI OUT A and SDI OUT B )
Note: AES inputs and outputs operational only with card
option +AES installed.
Table 2-1 9901-UDX Rear Modules — continued
9901-UDX Rear Module Description