Installation and setup – Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter User Manual
Page 51
9901-UDX-OM (V1.15)
9901-UDX PRODUCT MANUAL
2-13
Installation and Setup
Installing a Rear Module
RM20-9901-B-HV Base High-Ventilation
Rear Module
Provides the following connections:
• Two 3G/HD/SD-SDI video inputs
(
SDI IN A and SDI IN B
)
• Four AES I/O BNC (AES-3id) input/outputs
(
AES I/O 1
thru
AES I/O 4
; I/O function of each
connection is software-configurable)
• Four 3G/HD/SD-SDI video outputs
(
SDI OUT A thru SDI OUT D
)
Note: • AES inputs and outputs operational only with card
option +AES installed.
• Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9901-B-HV-HDBNC or
RM20-9901-B-HV-DIN, respectively.
RM20-9901-F-HV Base High-Ventilation
Rear Module
Provides the following connections:
• Two 3G/HD/SD-SDI video inputs
(
SDI IN A and SDI IN B
)
• Eight AES I/O BNC (AES-3id) input/outputs
(
AES I/O 1
thru
AES I/O 8
; I/O function of each
connection is software-configurable)
• Four 3G/HD/SD-SDI video outputs
(
SDI OUT A thru SDI OUT D
)
Note: • AES inputs and outputs operational only with card
option +AES installed.
• Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9901-F-HV-HDBNC or
RM20-9901-F-HV-DIN, respectively.
Table 2-1
9901-UDX Rear Modules — continued
9901-UDX Rear Module
Description