Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 60)

3
Accessing the 9901-UDX Card via Remote Control
3-6 9901-UDX PRODUCT MANUAL 9901-UDX-OM (V1.15)
Accessing the 9901-UDX Card via Remote Control
Access the 9901-UDX card using DashBoard™ or Cobalt ® Remote Control
Panel as described below.
Accessing the 9901-UDX Card Using DashBoard™
1. On the computer connected to the frame LAN, open DashBoard™.
2. As shown below (in the left side Basic View Tree) locate the Network
Controller Card associated with the frame containing the 9901-UDX
card to be accessed (in this example, “MFC-8320-N SN: 00108053”).
3. As shown below, expand the tree to access the cards within the frame.
Click on the card to be accessed (in this example, “Slot 6: 9901-UDX”).
.
As shown on the next page, when the card is accessed in DashBoard™
its function submenu screen showing tabs for each function is displayed.
(The particular submenu screen displayed is the previously displayed
screen from the last time the card was accessed by DashBoard™).
DB_ACCESS1.PNG
DB_ACCESS2A.PNG