Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 110)

3
9901-UDX Function Submenu List and Descriptions
3-56 9901-UDX PRODUCT MANUAL 9901-UDX-OM (V1.15)
(continued)
• Save/Delete Protect Button Locks and unlocks editing of presets to prevent accidental overwrite as
follows:
• Unprotected: Allows preset Save and Delete buttons to save or delete
current card settings to the selected preset. Use this setting when
writing or editing a preset.
• Protected: Toggle to this setting to lock down all presets from being
inadvertently re-saved or deleted. Use this setting when all presets
are as intended.
Note: When toggling between button modes, make sure to wait for the
card Settings status indicator to turn green before moving on.
Event Based Preset Loading
Event-based loading allows a defined preset to be
automatically engaged upon various received signal
status. Event-based loading is particularly useful for
automated card setup when transitioning from normal
processing to processing supporting an alternate
format.
Up to 64 individual events can be defined and detected.
Note: • Event Based Preset loading is not passive and can result in very significant and unexpected card control and signal
processing changes if not properly used. If event based presets are not to be used, make certain the Event Based Preset
Loading button is set to Disabled.
• Because event based preset loading applies card control changes by invoking presets, loading conditions cannot be nested
within a called preset (event-based loading settings performed here cannot be saved to presets).
• Event Preset Load Select Controls Event based preset loading checks for up to three conditions (as
described below) to all be true, and then invokes a selected preset when
an ANDed true occurs. Up to 64 discrete events can be defined, with
Event 1 having highest priority of engagement, and subsequently
numbered events engaging in descending priority when true.
Event-Based Preset Loading provides a global enable or disable for this
function.
Event status indicator shows if a defined event is true and has been
automatically engaged.
Acquired Video Format is condition A for three conditions comprising
the overall event statement. Drop-down selector allows input video format
received as condition A.
Dolby Decoder Detected Format is condition B for three conditions
comprising the overall event statement. Drop-down selector allows Dolby
format received by the card Dolby decoder as condition B.
Audio Silence Event Detected is condition C for three conditions
comprising the overall event statement. See Audio Silence Configuration
on page 3-58 for more information.
If A*B*C = True, Go To: selects the card preset to go to when the defined
conditions are true.
Note: • Any of the three conditions above can be set as a wildcard for any
event definition by selecting Don’t Care for the condition.
• Cards not equipped with Dolby decoder (option +DEC) do not
have Dolby Decoder Detected Format (B) event column.
• Make certain Go To: for any event screening not to be used is set
for No Preset. This prevents an event from unintentionally
invoking a preset.
Table 3-2 9901-UDX Function Submenu List — continued