Accessing the 9901-udx card using a cobalt, Operating instructions, Remote control panel – Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter User Manual
Page 61: Press the
9901-UDX-OM (V1.15)
9901-UDX PRODUCT MANUAL
3-7
Operating Instructions
Accessing the 9901-UDX Card via Remote Control
Accessing the 9901-UDX Card Using a Cobalt
®
Remote Control Panel
Press the
Select Device
key and select a card as shown in the example below.
Card Access/Navigation
Tree Pane
Card Info
Pane
Card Function Submenu
and Controls Pane
9901_DB_ACCESS.PNG
This display shows the list
order number of the device that
is ready for selection
This display shows the devices assigned to the Control Panel.
• Rotate any knob to select from the list of devices. The device selected using a knob
is displayed with a reversed background (in this example,
“1 9901 - Receiver 21 Input Processing”).
• Directly enter a device by entering its list number using the numeric keypad, and
then pressing Enter or pressing in any knob).
9901_3366_3392.JPG