Installation and setup – Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter User Manual
Page 49
9901-UDX-OM (V1.15)
9901-UDX PRODUCT MANUAL
2-11
Installation and Setup
Installing a Rear Module
RM20-9901-XB Expansion Rear Module
Used in conjunction with a base Rear Module to
provide the following additional connections:
• Four analog balanced audio I/O (
AN-AUD I/O 1
thru
AN-AUD I/O 4
; I/O function of each connection is
switch-configurable)
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y IN, Pr IN, and Pb/C IN, respectively)
• Analog Y/composite, Pr/C, and Pb coaxial outputs
(Y OUT, Pr OUT, and Pb/C OUT, respectively)
RM20-9901-XC Expansion Rear Module
Used in conjunction with a base Rear Module to
provide the following additional connections:
• Eight analog balanced audio I/O (
AN-AUD I/O 1
thru
AN-AUD I/O 8
; I/O function of each connection
is switch-configurable)
• Two fiber I/O (GUI configurable as I/O)
RM20-9901-XD Expansion Rear Module
Used in conjunction with a base Rear Module to
provide the following additional connections:
• Six analog balanced audio I/O (
AN-AUD I/O 1
thru
AN-AUD I/O 8
; I/O function of each connection is
switch-configurable)
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y IN, Pr IN, and Pb/C IN, respectively)
• Analog composite output (Cmpst OUT)
Table 2-1
9901-UDX Rear Modules — continued
9901-UDX Rear Module
Description