Troubleshooting, Error and failure indicator overview, Troubleshooting -64 – Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter User Manual
Page 118: Error and failure indicator overview -64, Troubleshooting (p. 3-64)
3
Troubleshooting
3-64
9901-UDX PRODUCT MANUAL
9901-UDX-OM (V1.15)
Troubleshooting
This section provides general troubleshooting information and specific
symptom/corrective action for the 9901-UDX card and its remote control
interface. The 9901-UDX card requires no periodic maintenance in its normal
operation; if any error indication (as described in this section) occurs, use this
section to correct the condition.
Error and Failure Indicator Overview
The 9901-UDX card itself and its remote control systems all (to varying
degrees) provide error and failure indications. Depending on how the
9901-UDX card is being used (i.e, standalone or network controlled through
DashBoard™ or a Remote Control Panel), check all available indications in
the event of an error or failure condition.
The various 9901-UDX card and remote control error and failure indicators
are individually described below.
Note:
The descriptions below provide general information for the various status and
error indicators. For specific failures, also use the appropriate subsection
listed below.
• Basic Troubleshooting Checks (p. 3-68)