Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 98)

3
9901-UDX Function Submenu List and Descriptions
3-44 9901-UDX PRODUCT MANUAL 9901-UDX-OM (V1.15)
(continued)
Note: Default factory preset routing routes bus channels Bus Ch 1 thru Bus Ch 16 to embedded outputs Emb Ch 1 thru
Emb Ch 16.
• Embedded Output Channel Source Select With the Emb Audio Out sub-tab selected, using the Source drop-down
list selects the card audio source to be directed to the corresponding
embedded output channel from the choices described below.
• Bus Ch 1 thru Ch 16 as Source for
Embedded Channel Output
Bus Ch 1 thru Bus Ch 16 range in Source drop-down list routes a card
internal bus channel (Bus Ch 1 thru Bus Ch 16) to be the source for the
selected embedded output channel.
(In this example, Bus Ch 1 is the source for destination Embedded output
Ch 1)
• Upmixer Channels as Source for
Embedded Channel Output
Upmix L thru Upmix Rs range in Source drop-down list routes an
upmixed channel to be the source for the selected embedded output
channel.
(In this example, Upmix L is the source for destination Embedded output
Ch 1)
• Loudness-Processed Channels as
Source for Embedded Channel Output
LP51 L thru LP51 Rs (5.1-channel loudness processor processed
channels L thru Rs) range in Source drop-down list routes a
loudness-processed channel to be the source for the selected embedded
output channel.
(In this example, loudness-processed channel LP51 L is the source for
destination Embedded output Ch 1)
Note: Where stereo loudness processor is available, drop-down
selections for these channels are LP2 L and LP2 R.
• Tone as Source for Embedded
Channel Output
Tone 50 Hz thru Tone 16 kHz range in Source drop-down list routes one
of eight tone frequencies to be the source for the selected embedded
output channel.
(In this example, 50 Hz tone is the source for destination Embedded
output Ch 1)
Table 3-2 9901-UDX Function Submenu List — continued
•
•
•
•
•
•
•
•
•
•
•
•