Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 5)

9901-UDX-OM (V1.15) 9901-UDX PRODUCT MANUAL 1-1
Chapter 1
Chapter 1
Introduction
Overview
This manual provides installation and operating instructions for the
9901-UDX 3G/HD/SD Up/Down/Cross Converter and Frame Sync card (also
referred to herein as the 9901-UDX).
Note: This manual also is applicable for reduced functionality versions:
• 9901-UC (pass/up-convert only)
• 9901-DC (pass/down-convert only)
• 9901-XC (pass/cross-convert only).
In all other aspects, all cards function identically as described in this manual.
This manual consists of the following chapters:
• Chapter 1, “Introduction” – Provides information about this manual
and what is covered. Also provides general information regarding the
9901-UDX.
• Chapter 2, “Installation and Setup” – Provides instructions for
installing the 9901-UDX in a frame, and optionally installing
9901-UDX Rear Modules.
• Chapter 3, “Operating Instructions” – Provides overviews of
operating controls and instructions for using the 9901-UDX.
This chapter contains the following information:
• 9901-UDX Card Software Versions and this Manual (p. 1-2)
• Manual Conventions (p. 1-3)
• Safety Summary (p. 1-4)
• 9901-UDX Base Model and Options (p. 1-5)
• 9901-UDX Functional Description (p. 1-6)
• Technical Specifications (p. 1-28)
• Warranty and Service Information (p. 1-33)
• Contact Cobalt Digital Inc. (p. 1-34)