Installation and setup, Installing a rear module – Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter User Manual
Page 43
Advertising
9901-UDX-OM (V1.15)
9901-UDX PRODUCT MANUAL
2-5
Installation and Setup
Installing a Rear Module
Figure 2-2 Rear Module Installation
DSCN3483A.JPG
Align and engage mounting tab on Rear
I/O Module with the module seating slot
on rear of frame chassis.
Hold top of Rear Module flush against
frame chassis and start the captive screw.
Lightly tighten captive screw.
DSCN3487A.JPG
Note: Rear Modules RM20-9901-E occupies two rear module slot
mounting locations and use two captive screws.
1
2
Advertising