Cobalt Digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converter - Manual (Page 92)

3
9901-UDX Function Submenu List and Descriptions
3-38 9901-UDX PRODUCT MANUAL 9901-UDX-OM (V1.15)
Input Downmixers – Provides four independent downmixers that
each multiplex any five embedded, AES, analog, or Dolby decoder
output audio channel sources (as L, R, C, Ls, Rs inputs) into a stereo
pair (Downmix A(L) / Downmix A(R) thru Downmix D(L) /
Downmix D(R))
Note: • Downmixers B thru D have controls identical to the controls described here for Downmixer A. Therefore, only the
Downmixer A controls are shown here.
• For each downmixer input channel, its source should be considered and appropriately set. Unused bus channels
should be set to the Silence selection.
• Downmixer A thru D Input Channel
Selection
Separate L, R, C, Ls, Rs drop-downs for each of the four independent
downmixers (A thru D) that directs any combination of card audio inputs
(listed below) to each downmixer input channel.
• Embed Ch 1 thru Embed Ch 16
• AES Ch 1 thru AES Ch 16
• Analog Ch 1 thru Analog Ch 8
• Dolby Decoder Output Ch 1 thru Dolby Decoder Output Downmix R
• Silence
Table 3-2 9901-UDX Function Submenu List — continued
•
•
•
Downmix A(L)
L
R
C
Ls
Rs
Downmix A(R)
Embedded Ch 1
Embedded Ch 2
Embedded Ch 3
Embedded Ch 5
Embedded Ch 6
AES Ch 1 - Ch 16
Anlg Ch 1- Ch 8
Embed Ch 1 - Ch 16
The example here shows selection from various sources and the resulting stereo pair Downmix A(L) and Downmix A(R). The
two signals comprising the pair can be routed and processed the same as any other audio input source.
Note: The stereo pair consists of basic L/R PCM signals with no additional encoded information.
To Audio Bus
Input Routing