GE Industrial Solutions NEMA EVSE CHARGING STATION - Manual (Page 72)

g
EV Charging Station User Manual & Installation Instructions
GE EV Charging Station User Manual 72 of 86
Figure 69: Network Settings Option 1 (See the Configuration Server Interface section)
Click the Radio button to “Use the following IP Address” and then enter both the IP address and
Subnet mask as shown.
Set the Ethernet IP address, Subnet Mask, and Default Gateway to the following settings:
Host IP Address 192.168.2.19
Host Subnet Mask 255.255.255.0
Host Default Gateway Leave Blank
Click on OK and close both windows to save your settings.
Note: Reboot PC to finalize with the configuration.
Note: The IP address above must match the Host IP address entered in the
configuration page of all connected EVSE. By default, this is 192.168.2.19.