GE Industrial Solutions NEMA EVSE CHARGING STATION - Manual (Page 80)

g
EV Charging Station User Manual & Installation Instructions
GE EV Charging Station User Manual 80 of 86
2. Install the SW
It is strongly recommended to install the SW in the default location.
- Insert CD 1 of the EV100 Application into the CD ROM and launch setup.exe
- Follow instructions and keep default Port settings of 3306
- Once finished with CD 1, insert CD 2 of the EV100 Application and launch setup.exe
- Follow instructions and keep default port settings at 9500 (unless another port has been set up in
the individual EVSE stations on the configuration server page)
- Add optional field descriptions for user identification, such as phone number, e-mail address, etc.
which shall be stored alongside the RFID identifier.
- Driver Attributes Menu - - Software Driver Menu -
- User Attributes Menu - - Software User Menu -
4.4.4 Setup Validation
After the successful installation of the EVSE network and EV100 Software, validate the installation by
following these steps:
1. Check that the EV100 Listener Service is running
Figure 75