GE Industrial Solutions NEMA EVSE CHARGING STATION User Manual

Page 74

Advertising
background image

g

EV Charging Station

User Manual & Installation Instructions

GE EV Charging Station User Manual

74 of 86

EVSE Controller Settings
Follow the instructions in the Controller Configuration section to set up each individual EVSE
according to the following settings:

EVSE IP
On initial power up the EVSE IP address will default to 192.168.2.2 This must be changed to an
appropriate address based on the network configuration. Failure to change the IP address
setting will impact the ability to bring up subsequent charging stations on the network due to
IP address collisions.
Check with the local network administrator to determine which address ranges are currently in
use at the site.
It is necessary to select ranges for the charging stations that are distinct from those currently
in use to avoid IP address conflicts.

If the 172.25.x.x. range is not in use the following settings should be implemented.


Set the EVSE Ethernet IP address, Subnet Mask, and Default Gateway to the following settings:

EVSE IP Address

172.25.0.xx

EVSE Subnet Mask

255.255.255.0

EVSE Default Gateway

172.25.0.1

Assign IP addresses to the charging stations beginning with 172.25.0.12. As additional charging
stations are added increment the last octet, so that they are numbered in consecutive
numbers starting from 12. (Examples: 172.25.0.12, 172.25.0.13, 172.25.0.14, and so on).
All of the charging stations will use the same subnet mask 255.255.255.0 with the default
gateway set to 172.25.0.1

Alternatively, if that range is in use, on the assumption that the 172.26.0.x. range is available
use these alternate settings:

EVSE IP Address

172.26.0.xx

EVSE Subnet Mask

255.255.255.0

EVSE Default Gateway

172.26.0.1


This alternate setting will require the assignment of IP addresses to the charging stations
beginning with 172.26.0.12 As additional charging stations are added increment the last octet,
so that they are numbered as for example: 172.26.0.12, 172.26.0.13, 172.26.0.14, and so on. All
of the charging stations will use the same subnet mask 255.255.255.0 with the default gateway
set to 172.26.0.1.

Subnet Mask
See above

Note: It is recommended to keep track of the different IP settings for each EVSE by
recording them on the form found on the final page of this document.

Action
required !

Advertising