CognitiveTPG DLXi User Manual
Page 122
S T A N D A R D P R I N T E R C O M M A N D S
space
Number of dots between each printed
character. Valid entries are 0 to 255
and N, with a default of 1. N sets non-
proportional character spacing; that
is, each character has the same width.
Font type C does not support non-
proportional spacing.
rot
Clockwise rotation of the printed
characters. Valid entries are 0, 90,
180, and 270. The default is 0.
Comments
ULTRA_FONT
fonts are stored in user-accessible
memory in many printers, and are handled as stored
objects. This means they may be deleted or replaced
in the field, so the actual resident fonts may differ
from those delivered in the printer. Take this into
account when using the ULTRA_FONT command.
This is the command used to access TrueType fonts
in the printer. For more information on creating and
downloading TrueType fonts, please see the separate
CognitiveTPG TrueType document.
See also
,
Example
JUSTIFY CENTER
ULTRA_FONT A70X160 (20,5,90) 620 300 ULTRA
ULTRA_FONT A70X160 (20,5,90) 420 300 FONTS
JUSTIFY LEFT
ULTRA_FONT A50 20 30 A50 FONT
ULTRA_FONT B50 20 90 B50 FONT
ULTRA_FONT A100 20 150 A100 FONT
ULTRA_FONT B100 20 250 B100 FONT
JUSTIFY CENTER
Revision F, January 2012, CognitiveTPG
113