CognitiveTPG DLXi - Manual (Page 167)

M E N U C O M M A N D S
MENU START
Function Signals the beginning of a menu definition and
specifies the menu storage location and identifier.
NOTE: This command does not execute the menu;
the command only prepares the printer to receive the
menu for storage. Use
Recall Menu to execute
stored menus.
Explicit Form
MENU START x menuname
Implicit Form MU START x menuname
Parameters x Storage location. You can store
menus in the following memory
areas:
x
Location
0 Volatile RAM
1 Reserved
2 Expanded Memory
3 Nonvolatile RAM
menuname
The menu identifier can be up to
eight alphanumeric characters. The
first character must be an
uppercase or lowercase letter (A-Z
or a-z).
The menu name __BOOT__ (the
word BOOT preceded and followed
by two underscore characters) is
reserved for an autostart routine.
Use this menu name only if you
want the printer to execute the
menu automatically on power-up.
The printer will always try to
execute __BOOT__ when it is
158 Revision F, January 2012, CognitiveTPG