CognitiveTPG DLXi - Manual (Page 145)

S T O R I N G D A T A I N T H E P R I N T E R M E M O R Y
Placing two variable field
delimiters in a row creates a
repeating field; i.e., will cause the
printer to use the variable data
from the previous variable field in
the current field. This feature may
be useful if you want to print the
same data using two different
fonts, or want to print the data as a
rotated bar code and non-rotated
text.
NOTE: Do try to make the first field
in a stored format a repeating field
(since there is no data to repeat). Do
not place any text after the variable
field delimiter when creating a
repeating field.
When using enhanced format
storage, the variable field delimiter
also separates the fixed data
commands from the variable data
commands. Put all commands that
define variable fields at the end of
the data file. Precede all of these
commands with a single line that
only contains the variable field
delimiter.
xx Numeric identifier for the desired
memory storage area.
t
Data type. F indicates standard
ASCII format files. E indicates
enhanced format files. If storing an
enhanced format, the E must be
followed by the nnn parameter.
nnn Number of dot rows the stored
format will plot. Only use this
parameter when programming an
enhanced stored format; that is,
with the E data type.
136 Revision F, January 2012, CognitiveTPG