Query index buffer values, Query index – CognitiveTPG DLXi User Manual
Page 95
S T A N D A R D P R I N T E R C O M M A N D S
Query Index Buffer Values
Function
This command is used to query the values in the
index sensor buffer.
Explicit Form
!QIB
Comments
This command will return comma separated values
that are the value from the index sensor and the
index mark value. The index mark value will be 0 if
this is the trailing edge of an index mark, 255 if it is
the leading edge of an index mark or it will be
current white level value.
This command does not require a header line, but
must be followed by a line feed (or carriage return
and line feed). Do not use any other commands with
!GET INDEX
.
Example
The following will return the index settings to the
current communication port.
!QIB
86
Revision F, January 2012, CognitiveTPG