CognitiveTPG DLXi - Manual (Page 149)

S T O R I N G D A T A I N T H E P R I N T E R M E M O R Y
GRAPHIC STORE
Function Stores the graphics file following the command in
the specified memory area
NOTE: Use this command with a dummy header line,
and do not use an
END command or any other
commands with it. The graphics data to be stored
must immediately follow the
GRAPHIC STORE
command.
Explicit Form GRAPHIC STORE Type xx Identifier
Parameters Type Graphic file type. Allowable types
are PCX, BMP, and LOGO
(proprietary CSI graphics format).
xx Numeric identifier for the desired
memory storage area.
identifier
Alphanumeric identifier to use
when storing this data. Must be
eight or fewer printable characters
with no spaces.
Comments The printer waits for graphics data after it
receives the GRAPHIC STORE command. Incoming
data following the GRAPHIC STORE command is
stored in the specified memory area. The printer
automatically reverts to normal data input
processing when it sees the end of the graphics file.
Use the
GRAPHIC RECALL
command to recall and
print the graphic on labels. The printer only prints
black-and-white graphics. Also, graphics are
printed full-scale, with each image dot
corresponding to one printed dot.
See also
GRAPHIC RECALL
Example The following commands will store following
graphics data in nonvolatile RAM as IMAGE_1.
! 0 0 0 0
140 Revision F, January 2012, CognitiveTPG