CognitiveTPG DLXi - Manual (Page 182)

P R I N T E R S E T U P
VARIABLE AUDIO_FREQ
Function Sets the frequency of the beeper.
Explicit Form
Implicit Form
VARIABLE AUDIO_FREQ hertz
V AUDIO_FREQ hertz
Parameters hertz Valid values 0-20000.
Comments This command is not supported in DLX or CSeries
printers.
When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label
formats.
See also
BEEPER
Example The format below will set the beeper to 1000 cycles
per second (hertz):
! 0 0 0 0
VARIABLE AUTDIO_FREQ 1000
VARIABLE WRITE
END
Revision F, January 2012, CognitiveTPG 173