Variable terminal – CognitiveTPG DLXi User Manual
Page 258
P R I N T E R S E T U P
VARIABLE TERMINAL
Function
Configures port to be used to prompt for input when
using stored formats, stored menus or stored
variables.
Explicit Form
Implicit Form
VARIABLE TERMINAL port
V TERMINAL port
Parameters
?
port
Returns the current setting.
RS232, LCD_PANEL, USB, RTEL,
DISCOVER.
Comments
This is meant to be used as a setup command and
not during script execution. When the DISCOVER
parameter is used the printer assumes the display
device is attached to the port that initiated the
script. In the case that the input channel is a USB
Human Input Device (HID), the output goes to the
RS232 port.
When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label
formats.
See also
Example
The format below will configure printer to send
prompts to RS232 port:
! 0 0 0 0
VARIABLE TERMINAL RS2332
VARIABLE WRITE
END
Revision F, January 2012, CognitiveTPG
249