CognitiveTPG DLXi - Manual (Page 176)

P R I N T E R S E T U P
Add String to Trace File
Function This command is used to add a string to an open
trace file.
Explicit Form !SET TRACEMARK mark
Parameters mark The string to insert in the trace file to
mark a particular point in the trace.
Can be up to 80 characters long.
Comments This command does not require a header line, but
must be followed by a line feed (or carriage return
and line feed). Do not use any other commands with
!SET TRACEMARK
.
Example The following will add the line ‘Format_Sent’ to the
trace file that is already open.
!SET TRACEMARK Format_Sent
Revision F, January 2012, CognitiveTPG 167