Variable label_length – CognitiveTPG DLXi User Manual
Page 224
P R I N T E R S E T U P
VARIABLE LABEL_LENGTH
Function
Manually sets the length of the label stock in use.
This value is the length from the beginning of one
label to the beginning of the next.
Explicit Form
VARIABLE LABEL_LENGTH nnn
Parameters
nnn
The length of the label,
in hundredths of an inch.
? – returns the current setting
status.
Comments
When using this command the VARIABLE
GAP_SIZE command should also be used to set the
length unprintable part of the label. The
VARIABLE MEASURE_LABEL command should
also be used to automatic measurement, which will
overwrite the value manually set.
When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format. Do not use this command in stored label
formats.
See also
Example
The following command sets the label length to two
inches.
! 0 0 0 0
VARIABLE LABEL_LENGTH 200
VARIABLE WRITE
END
Revision F, January 2012, CognitiveTPG
215