CognitiveTPG DLXi - Manual (Page 243)

P R I N T E R S E T U P
VARIABLE PRESENTLABEL
Function Controls the dispensing of labels for application.
VARIABLE PRESENTLABEL
ensures a second set of
labels is not printed before the operator is ready, and
enables the user to change the distance fed forward
and backward after printing.
Explicit Form
Implicit Form
VARIABLE PRESENTLABEL Action
Advance_Distance Retract_Distance
Time_Delay
VARIABLE PRESENTLABEL Action
V PRESENTLABEL Action
Parameters
Active
Valid values are ON and OFF. When no
parameters are specified, the printer
uses the last stored settings to set the
Advance_Distance
or
Retract_Distance
. When OFF,
parameters are ignored.
A ? returns the current setting status.
Advance
_Distance
Distance the label is advanced in
hundredths of an inch. Refer to Table
4, Variable Present Label
Limitations for the maximum
acceptable values for each printer.
Retract_
Distance Distance the label is retracted in
hundredths of an inch. Refer to
Table
4, Variable Present Label
Limitations
for the maximum
acceptable values for each printer.
Time_
Delay Time in seconds before the printer
retracts and is ready to print. If not
specified, the printer retracts before
printing the next job. Set
Time_Delay
to 0 to remove the delay.
234 Revision F, January 2012, CognitiveTPG