CognitiveTPG DLXi - Manual (Page 250)

P R I N T E R S E T U P
VARIABLE REPORT_LEVEL
Function Sets the manner in which the printer reports
recoverable errors.
Explicit Form
Implicit Form
VARIABLE REPORT_LEVEL n
V REPORT_LEVEL n
Parameters n 0 No error reporting. This is the default
error level in most printers.
1 Error messages are sent to the serial
port.
2
Error messages are sent to the serial
port and printed on the label.
? Returns current setting.
Comments When using this command, send it to the printer
with VARIABLE WRITE in a non-printing label
format.
Do not use this command in stored label formats.
See also VARIABLE REPORT_TYPE
Example The format below will tell the printer to send an
error message to the printer serial port and print an
error label when it encounters a recoverable error:
! 0 0 0 0
VARIABLE REPORT_LEVEL 2
VARIABLE WRITE
END
Revision F, January 2012, CognitiveTPG 241