Adjust – CognitiveTPG DLXi User Manual
Page 30
S T A N D A R D P R I N T E R C O M M A N D S
ADJUST
Function
Increments or decrements a variable value or numeric
data on the preceding command line.
Explicit
Form
ADJUST
variable nnn
Implicit
Form
A
variable nnn
Variable
The name of the variable to be adjusted,
as specified in its
command.
The variable value is adjusted wherever it
is called before the ADJUST command in
the label format. This is an optional
parameter, and is not supported in all
printers. If no variable is specified, the
printer will adjust the data on the
command line immediately preceding the
ADJUST
command.
NOTE: Do not confuse variable values (as
used to represent data) with
VARIABLE
commands (which control the printer). Also,
only printers that support the
DEFINE_VAR
command will support variable values. Refer
to
Table 1, Printer command compatibility
for more information.
Parameters
Nnnn
The incrementing or decrementing step
size. Positive or negative numbers are
accepted.
Comments Using
ADJUST
to increment or decrement alpha data can
produce unexpected results.
NOTE:
ADJUST
will not work properly with the
!
+ header
line parameter
See also
Example
! 0 100 200 3
BARCODE CODE39 150 30 30 TEST20
Revision F, January 2012, CognitiveTPG
21