Controlled Products Systems Group SLIDESMART DC 10F - Manual (Page 106)

Installing Vehicle Detectors and Loops
6-8 SlideSmart DC Installation and Reference Manual Revision D
Figure 6-7.
B
ENTER EXIT
OBSTRUCTION
LOOP
A
ACCESS CONTROL DEVICE
(Card reader, etc.)
Vehicle Detectors and Loop Layout for Slide Gates
PUBLIC SIDE
This layout illustrates a
bi-direcƟonal traffic system with
controlled access entry (card
reader, radio control, etc.) and a
free exit gate. The gate’s closure
Ɵme is determined by the number
of seconds entered in the
CLOSE TIMER display found in the
User Menu. The Ɵming to close
starts when all loops are clear.
The Ɵmer is adjustable from
1 to 99 seconds.
For a single-direcƟonal system,
the FREE EXIT loop is replaced by
an OBSTRUCTION loop. For a single-direcƟonal system,
the FREE EXIT loop is replaced by
an OBSTRUCTION loop.
SECURE SIDE
C
D
E
FREE EXIT
or
OBSTRUCTION
LOOP
DIMENSIONS
A = 6 to 20Ō (2 to 6m)
B = 6 to 8Ō (2m to 243cm)
C = Maintain 4Ō (122cm)
D = Maintain 5Ō (152cm) between loop
and edge of roadway. No vehicle can pass
through such a small area and escape detecƟon.
E = Located for convenience of use.
OBSTRUCTION
LOOP