Controlled Products Systems Group SLIDESMART DC 10F - Manual (Page 16)

Important Safety Instructions
S-4 SlideSmart DC Installation and Reference Manual Revision D
Hazardous Materials and Proper Disposal
SlideSmart uses sealed, state-of-the-art Absorbed Glass Mat (AGM) batteries and highly recommends replacing
used batteries with new AGM-type batteries.
CAUTION !
The batteries used with the SlideSmart gate operator contain materials that are considered haz-
ardous to the environment. Proper disposal of the battery is required by federal law. Refer to
federal guidelines found in Hazardous Waste Regulations.
To reduce the risk of fire or injury to persons:
•
Observe the polarity between the batteries and charging circuit.
• Never mix battery sizes, types, or brands. The charging circuit on HySecurity DC operators is designed for
AGM-type batteries, not lead acid-type batteries. HySecurity strongly recommends that only sealed AGM
style batteries be used.
• Exercise care in handling batteries. Be aware that the metal found in rings, bracelets, and keys can conduct
electricity, short the batteries, and cause potential injury.
• Do not open or mutilate the batteries. Battery cells contain corrosive materials which may cause burns and
other injuries. The material within batteries is toxic.
• Always dispose of batteries properly. Do NOT place batteries in fire. The battery cells may explode. Follow
federal guidelines for proper disposal of hazardous waste.
• Replace batteries according to the instructions found in DC Battery Replacement.