Controlled Products Systems Group SLIDESMART DC 10F - Manual (Page 28)

Unpacking the Operator
1-6 SlideSmart Installation and Reference Manual Revision D
U
NPACKING THE
O
PERATOR
Prepare the gate operator for installation. See Figure 1-8.
1. Open the top of the box and remove packing materials.
2. Cut open the box to access the operator.
3. Lift the cover up and off the base of the operator. DO NOT lift the cover by its lock.
Service Outle
t 115VAC, 15A
Cover
Base plate
Figure 1-8.
Lock