Controlled Products Systems Group SLIDESMART DC 10F - Manual (Page 33)

Gate Bracket and Chain Installation
Revision D Installation 1-11
Programming the Initial Setup Menu
Several sequential displays present information which must be configured before SlideSmart will function.
Once the configuration is complete, the information is retained even when a power loss occurs.
Table 1-2. Menu Mode Navigational Buttons
SELECTIONS
To edit the Menu
To navigate through
the SELECTIONS
To choose what is on
the display
To navigate between
menus
Press SELECT.
Two top characters blink.
Press NEXT.
Continue pressing NEXT
to view all selections.
Press SELECT.
blinking characters
become static.
Press NEXT or PREV.
Advance - press NEXT.
Previous - press PREV.
OPEN CLOSE STOP MENU RESET
PREV NEXT SELECT
WT 0
GATE WEIGHT (LB)
UC 0
USAGE CLASS
OPEN CLOSE STOP MENU RESET
PREV NEXT SELECT
OPEN CLOSE STOP MENU RESET
PREV NEXT SELECT
SH 0
GATE HANDING
Figure 1-15.
0 - No Usage Class set.
1 - Single Family residential up to four units.
2 - Multi-family, hotel, etc.
3 - Industrial use, not for general public.
4 - Guarded and monitored facility, not for general public.
SELECTIONS
0 - No handing set. Gate will not move until handing is set.
Looking at the gate from the secure side, choose:
L - If the gate slides open to the left.
R - If the gate slides open to the right.
SELECTIONS
0 - Gate weight not set.
SlideSmart DC 15
1 - Gate weight: 0 to 400lbs (0 to 181Kg)
2 - Gate weight: 401 to 800lbs (182 to 363Kg)
3 - Gate weight: 801 to 1100lbs (363 to 499Kg)
4 - Gate weight: 1101 to 1500lbs (499 to 680Kg)
SlideSmart DC 10F
1 - Gate weight: 0 to 250lbs (0 to 114Kg)
2 - Gate weight: 251 to 500lbs (114 to 227Kg)
3 - Gate weight: 501 to 750lbs (227 to 340Kg)
4 - Gate weight: 751 to 1000lbs (341 to 454Kg)
Once the gate weight is set, the operator is ready to learn
OPEN and CLOSE limits.