Qualified cables for the fc8-64 port blade – Brocade DCX 8510-8 Backbone Hardware Reference Manual User Manual
Page 138
Supported optics, speeds, cables, and distances (Continued)
TABLE 26
Transceiver
type
Form
factor
Speed
Multimode
media (62.5
microns)
(OM1)
Multimode
media (50
microns)
(OM2)
Multimode
media (50
microns)
(OM3)
Multimode
media (50
microns)
(OM4)
Single
Mode
Media (9
microns)
SFP+
8 Gbps
N/A
N/A
N/A
N/A
10 km (6.2
mi.) or 40
km (24.8
mi.)
SFP+
10 Gbps N/A
N/A
N/A
N/A
10 km (6.2
mi.)
SFP+
16 Gbps N/A
N/A
N/A
N/A
10 km (6.2
mi.)
Qualified cables for the FC8-64 port blade
The following table lists the third party cables that have been qualified for use with the mSFP
transceivers in the FC8-64 high density port blade.
Qualified cables for mSFP connections for the FC8-64 high density port blade
TABLE 27
Description
Length Corning part number
Molex part
number
Amphenol part
number
Patch cables - mSFP to LC
S50502S5120XXXM (XXX
= length)
943-99865-1XXXX
(XXXX = length)
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125
1 m
S50502S5120001M
106273-0525
943-99865-10001
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125
2 m
S50502S5120002M
106273-0526
943-99865-10002
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125
3 m
S50502S5120003M
106273-0527
943-99865-10003
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125
5 m
S50502S5120005M
106273-0528
943-99865-10005
mSFP LC - standard LC,
duplex, multi-mode, OM3,
50/125
10 m
S50502S5120010M
106273-0529
943-99865-10010
Qualified cables for the FC8-64 port blade
138
Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-07