Brocade DCX 8510-8 Backbone Hardware Reference Manual User Manual
Page 152
Advertising
FIGURE 41 CR16-8 core blade
1. Port map
2. QSFP ports 12-15 (bottom to top)
3. QSFP ports 8-11 (bottom to top)
4. QSFP ports 0-3 (bottom to top)
5. QSFP ports 4-7 (bottom to top)
The following table shows the mappings from the numbered ports on the face of the core blade to the
port mappings as shown by the slotShow command. Each external port maps to four actual ports.
External port to slotShow port mapping for core blades
TABLE 30
External port number
slotShow port numbers
External port number
slotShow port numbers
0
0-3
8
32-35
1
4-7
9
36-39
Port Numbering Template
152
Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-07
Advertising