Replacing a filler panel – Brocade DCX 8510-8 Backbone Hardware Reference Manual User Manual
Page 81
Advertising
FIGURE 22 Removal and replacement of the blade filler panel
Replacing a filler panel
Do not leave a slot empty. This will adversely affect cooling of the chassis.
1. Orient the filler panel.
2. Slide the filler panel into the slot until it is firmly seated.
3. Tighten the thumbscrews.
4. Replace the chassis door.
Replacing a filler panel
Brocade DCX 8510-8 Backbone Hardware Reference Manual
81
53-1002180-07
Advertising