Brocade DCX 8510-8 Backbone Hardware Reference Manual - Manual (Page 140)

FIGURE 39 QSFP to QSFP standard cables
1. QSFP MTP connector
FIGURE 40 QSFP-SFP/LC Break-out/Split-out cables
1. QSFP MTP connector
2. SFP+ LC connectors
With the support for breakout cables, each port can be in a different mode. Inside the single physical
QSFP port, individual ports can be configured as an E_Port, F_Port or EX_Port. Also, each internal
port inside a single physical QSFP can be part of different Logical Switches.
With the support for breakout cables, trunking can be enabled on ports in a QSFP port group, with
ports connected through breakout cables at the other end.
Specifications
140 Brocade DCX 8510-8 Backbone Hardware Reference Manual
53-1002180-07