Brocade DCX 8510-8 Backbone Hardware Reference Manual - Manual (Page 139)

Qualified cables for mSFP connections for the FC8-64 high density port blade (Continued) TABLE 27
Description Length Corning part number Molex part
number Amphenol part
number
Patch cables - mSFP to
mSFP S5S502S5120XXXM (XXX
= length) 943-99866-1XXXX
(XXXX = length)
mSFP LC - mSFP LC,
duplex, multi-mode, OM3,
50/125 1 m S5S502S5120001M 106273-0560 943-99866-10001
mSFP LC - mSFP LC,
duplex, multi-mode, OM3,
50/125 2 m S5S502S5120002M 106273-0561 943-99866-10002
mSFP LC - mSFP LC,
duplex, multi-mode, OM3,
50/125 3 m S5S502S5120003M 106273-0562 943-99866-10003
mSFP LC - mSFP LC,
duplex, multi-mode, OM3,
50/125 5 m S5S502S5120005M 106273-0563 943-99866-10005
mSFP LC - mSFP LC,
duplex, multi-mode, OM3,
50/125 10 m S5S502S5120010M 106273-0564 943-99866-10010
Trunk cables - mSFP to MTP tbd
mSFP LC - MTP-female, 12
fiber, 12" breakout, OM3,
50/125 H93S5TE9-BMU-XXXM
(XXX = length) 943-99867-1XXXX
(XXXX = length)
mSFP LC - MTP-female, 12
fiber, 6" breakout, OM3,
50/125 2m 106272-0327
mSFP LC - MTP-female, 24
fiber, 12" breakout, OM3,
50/125 2m 106272-0328
Bag of clips (quantity 64) TRIGGER-BP-NP n/a n/a
Cable types supported on the FC16-64 port blade
The FC16-64 port blade supports simplified cable management using QSFP cables. Each QSFP cable
has four links internally that run at 16-Gbps speed and the cables come in specific predetermined fixed
lengths.
The FC16-64 port blade supports the following types of cables:
Cable types supported on the FC16-64 port blade
Brocade DCX 8510-8 Backbone Hardware Reference Manual 139
53-1002180-07