Verifying correct operation of system – Brocade DCX 8510-4 Backbone Hardware Reference Manual User Manual

Page 105

Advertising
background image

Verifying correct operation of system

Complete the following steps to verify the correct operation of the Brocade DCX 8510-4.

1. Log in to the Brocade DCX 8510-4 as admin.

switch:admin> login

login: admin

password: xxxxxxxx

switch:admin>

2. Enter the slotShow -m command and verify that all the installed cards are detected and that their

status is operational (enabled). The example is from a DCX chassis. The other backbone chassis are
similar.

switch:admin> slotShow -m

Slot Blade Type ID Model Name Status

--------------------------------------------------

1 SW BLADE 97 FC16-32 ENABLED

2 SW BLADE 77 FC8-64 ENABLED

3 CORE BLADE 99 CR16-4 ENABLED

4 CP BLADE 50 CP8 ENABLED

5 CP BLADE 50 CP8 ENABLED

6 CORE BLADE 99 CR16-4 ENABLED

7 SW BLADE 96 FC16-48 ENABLED

8 SW BLADE 77 FC8-64 ENABLED

3. Verify that the Brocade DCX 8510-4 is functioning correctly by entering switchShow or

switchStatusShow.

This switchShow command displays the Brocade DCX 8510-4 and port status information. The
example is from a DCX 8510-8. The other backbone chassis are similar.

switch:FID128:admin> switchshow

switchName: DCX8510_8

switchType: 120.1

switchState: Online

switchMode: Native

switchRole: Subordinate

switchDomain: 80

switchId: fffc50

switchWwn: 10:00:00:05:1e:39:e4:5a

zoning: ON (ZONE_CONFIG_NAME)

switchBeacon: OFF

FC Router: OFF

Allow XISL Use: OFF

LS Attributes: [FID: 128, Base Switch: No, Default Switch: Yes, Address Mode 0]

Index Slot Port Address Media Speed State Proto

=======================================================

0 1 0 500000 -- 4G No_Module FC

1 1 1 500100 -- 4G No_Module FC

2 1 2 500200 -- 4G No_Module FC

3 1 3 500300 -- 4G No_Module FC

4 1 4 500400 -- 4G No_Module FC

(output truncated)

DCX-4_130:admin> switchshow

switchName: DCX-4_130

switchType: 121.3

switchState: Online

switchMode: Native

switchRole: Principal

switchDomain: 130

switchId: fffc82

switchWwn: 10:00:00:05:33:03:2c:00

zoning: ON (ZONE_CONFIG_NAME)

switchBeacon: OFF

FC Router: ON

FC Router BB Fabric ID: 10

Address Mode: 0

Index Slot Port Address Media Speed State Proto

=======================================================

0 1 0 820000 id N8 Online FC F-Port

10:00:00:05:1e:f8:a0:b4

Verifying correct operation of system

Brocade DCX 8510-4 Backbone Hardware Reference Manual

105

53-1002177-07

Advertising